Register now – As a Trade Contractor / Next-Day Delivery for £30 — Order before 12 noon. Excludes Fri, Sat & Sun.
BLACK FRIDAY SALE — 5% OFF CODE: EYFRIDAY5 Shop Now →
Clearpay available at checkout

Shopping Cart

0

Your shopping bag is empty

Go to the shop

Driveway Cleaning and Sealing: A Complete Maintenance Guide

Driveway Cleaning and Sealing: A Complete Maintenance Guide

Be honest. When did you last really look at your driveway? Most of us only notice it when the green film appears, or someone parks over an oil patch. The good news is that driveway cleaning and sealing isn't a huge job, and a decent weekend gets you most of the way.

 

Driveway Cleaning and Sealing: Where to Begin

Make sure the weather is nice. You want a few dry days in a row, because the stone needs to be properly dry before any sealer goes on. Spring and early autumn are usually the sweet spots.

Then walk the drive and take a proper look. Where's the algae? Any oil? Weeds in the joints? Knowing what you are dealing with saves time later.

Whatever you use, test it on a small, out-of-the-way patch first. Natural stone can react differently from slab to slab.

 

Sweep First, Then Wash 

Brush off leaves, grit, and loose debris with a stiff brush. It makes the next step far more effective, so don't skip it.

Next comes the wash. ProJoint Ultimate Paving Cleaner is a concentrate made for this kind of job. It tackles oil, grease, rubber marks, mould, algae and general grime. Dilute it 1 part cleaner to 10 parts water, and it's safe to use with a pressure washer.

Things to have ready:

  • A stiff brush and a broom
  • A bucket for diluting the cleaner
  • A pressure washer, or a hose and elbow grease
  • Gloves and waterproof boots
  • Plenty of water for a thorough rinse

One heads-up. Keep it well away from fish ponds and aquariums.

 

Dealing With the Stubborn Bits

Some marks need a bit more persuasion. Tyre scuffs and oil often lift with a second pass of the cleaner and a good scrub.

Has work been done recently? Cement splashes, grout haze and white, salty deposits are a different problem. That's where EcoProtec Cement, Grout & Salt Residue Remover comes in. It's made to lift those marks after installation, so the stone looks properly fresh. Handy if the builders have just left.

 

Let the Surface Dry First

This is the step everyone wants to skip, but don't. Let the surface dry fully, which can take a day or two depending on the weather. Sealing damp stone is the quickest way to a patchy finish.

 

Time to Seal

Once it's clean and dry, sealing is the bit that makes all your hard work last. ProJoint PRO-410 Colour Enhancing Paving Sealer is a solvent-based sealer for natural stone, with a matt finish. It soaks into the stone rather than sitting on top, so the surface stays breathable.

It deepens the stone's natural colours without changing the texture. It also helps protect against water, staining and algae. It goes on in a single coat too.

Coverage is roughly 4.5 to 7 square metres per litre, depending on how porous your stone is. For a 30 square metre drive, think about 4 to 7 litres. Always follow the instructions on the tin, and make sure there's good ventilation if you are working near a doorway.

 

Laying a New Drive?

If your stone's brand new, the order of play changes a little. The ProJoint Pre-grout Paving Sealer is there for sealing before the grout goes in, so grout doesn't mark the surface. Afterwards, EcoProtec Cement, Grout & Salt Residue Remover can tidy up any leftover haze. Check each product's guidance for exact timings.

 

Products and Their Uses

Product

Use

ProJoint Ultimate Paving Cleaner

Removes oil, grease, rubber marks, mould, algae and general grime from paving surfaces.

EcoProtec Cement, Grout & Salt Residue Remover

Removes cement splashes, grout haze and white salt deposits after installation.

ProJoint PRO-410 Colour Enhancing Paving Sealer

Seals natural stone, enhances its natural colours and helps protect against water, staining and algae while maintaining a matt finish.

ProJoint Pre-grout Paving Sealer

Seals paving before grouting to help prevent grout from staining the stone surface.

 

 

Keeping It Looking Good

Sealing is not a "never think about it again" job. A little routine goes a long way:

  • Sweep every week or two
  • Hose it down now and then
  • Deal with oil spills quickly
  • Give it a proper clean in spring and autumn
  • Check how water beads on the surface, and reseal when that fades

 

Driveway Cleaning and Sealing Slip-Ups to Avoid 

A few things catch people out. Sealing before the stone's dry. Skipping the test patch. Rushing the rinse and leaving cleaner on the surface. And expecting a sealer to fix a driveway that hasn't been cleaned properly.          

It's also one thing to keep in mind: results vary with the type and age of your stone. If you are unsure, ask before you start.

 

Need a Hand?

Not sure which product suits your stone, or how much to order? Our team at East Yorkshire Stone is happy to help. Get in touch and we will point you in the right direction.