UltraScape Flowpoint Fine – 25KG
UltraScape Flowpoint Fine is a professional-grade, rapid-setting flowable grout designed to create smooth, durable joints between paving units. Its fine formulation is particularly suitable for porcelain paving and narrow joints, delivering a neat, seamless finish across domestic and commercial paved areas.
The high-fluid consistency allows the grout to flow effectively into joints, helping create strong, rigid and void-free jointing. It is suitable for patios, pathways, driveways, pedestrian areas, town centres and carriageways.
Key Features
-
Rapid-setting flowable paving grout
-
Ideal for porcelain and smooth paving
-
Suitable for natural stone, concrete flags and clay pavers
-
Suitable for joint widths from 2mm to 50mm
-
Creates smooth, rigid and void-free joints
-
Open to pedestrian traffic in approximately 1 hour
-
Open to vehicular traffic in approximately 4 hours
-
Initial setting time of approximately 15 minutes at 20°C
-
Exceptional bond strength
-
Shrinkage-compensated formula
-
Requires only the addition of water
-
Compliant with BS 7533
-
Suitable for domestic and commercial applications
Suitable Applications
Flowpoint Fine can be used for jointing:
Application Information
Add the recommended amount of clean water and mix thoroughly until a smooth, lump-free consistency is achieved. Pre-soak the paving surface and ensure all joints are clean and free from debris before application.
Pour the mixed grout over the paving and move it into the joints using a suitable neoprene squeegee. Once the grout has achieved its initial set, clean the paving thoroughly using a brush and plenty of water. Do not allow grout residue to dry on the paving surface.
Coverage will vary depending on slab dimensions, joint width and joint depth.
Product Type: Rapid-Setting Flowable Paving Grout
Pack Size: 25KG
Joint Width: 2–50mm
Suitable For: Porcelain, natural stone, concrete and clay paving
Traffic Type: Pedestrian and vehicular areas
Available Colours: Natural Grey and Charcoal